Here is a list of what we can offer
Magnetic Particle Inspection (MPI)
Magnetic Particle Inspection (MPI) is a non-destructive testing method that can detect surface and subsurface flaws in ferromagnetic materials. Ideally used on welds and other areas cracking may be present but not visual to the naked eye.This is mainly on carbon steel, however stainless steels and other non-ferromagnetic materials would be better suited to dye penetrant inspection.
This method is also useful for testing on-site as it is portable.
Dye Penetrant Inspection (DPI)
Dye Penetrant Inspection is used for detecting surface breaking defects such as cracking in both ferrous as well as non-ferrous materials. However for ferrous materials Magnetic Particle Inspection is recommended due to its sub surface ability. This non-destructive testing technique and is a cost-effective method used to locate surface breaking flaws such as cracks, porosity, laps, seams and other surface discontinuities.
Ultrasonic Inspection
Ultrasonic Inspection is used to predominately measure the thickness of materials. Ultrasonics are used during most inspections and can be applied to almost every asset.
Ultrasonics used on the following:
Storage Tanks / Stack tower & columns / Pipelines / Pressure Vessels / Boiler Tubes